Turning the projector on
Warning! Failure to comply with the following could result in serious injury.
DO NOT attempt to turn the projector on if the AC supply is not within the specified voltage range.
See
Projector Specifications on page 99
1. Ensure the circuit breaker for the projector is on.
2. On the touch panel controller (TPC), tap and hold the green power (
Logging on to the projector
1. On the touch panel controller (TPC), tap Menu > Login.
2. Select a user name in the Username list. To view the permissions associated with each account
see
Interpreting user access permissions on page
3. Enter your password.
4. Tap Login.
Activating marriage
You must complete marriage to display encrypted content and to comply with Digital Cinema
System Specification (the DCI specification). You cannot complete marriage remotely. In addition,
an authorized employee must be physically present to verify that the anti-tamper seal on the card
firewall is unbroken, the projector is unaltered, and to tap the marriage button on the card cage
faceplate.
1. Log on to the projector with marriage permissions. See
27.
2. Tap Menu > Service Setup > IMB Marriage.
3. Complete the Marriage wizard.
4. Click Finish.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
for power requirements.
70.
Logging on to the projector on page
Installing and Setting Up
) icon.
27