Modifying A Mcgd File; Creating A Tcgd File; Modifying A Tcgd File - Christie CP2208 User Manual

7. Record the red chromaticity value.
8. Repeat steps 5 to 7 for the green, blue, white, and black chromaticity measurements. Select
the test pattern that matches the color you are measuring.
9. Enter the chromaticity measurements you recorded in step 7 in the red, green, blue, white, and
black x and y fields.
10. If the MCGD file will be associated with a 3D channel, tap Enable 3D and select a frame rate in
the Frame Rate N:M list.
11. Tap Save.

Modifying a MCGD file

1. Tap Menu > Advanced Setup > MCGD File Setup.
2. Select a MCGD file in the Current Measured (MCGD) File list.
3. Modify the MCGD file settings.
4. Tap Save.

Creating a TCGD file

Typically, Target Color Gamut Data (TCGD) file settings are defined by your content provider.
1. Turn the lamp on and allow it to operate for 20 minutes.
2. Tap Menu > Advanced Setup > TCGD File Setup.
3. Tap Save As.
4. Enter a name for the TCGD file in the Filename field.
5. Tap OK.
6. Tap Display Test Pattern.
7. Tap the option button in the red area of the chromaticity image to display the red test pattern.
8. Measure the red chromaticity with the colorimeter.
9. Enter the red chromaticity values in the x, y, and Gain fields.
10. Repeat steps 6 to 8 for the magenta, blue, white, yellow, and green chromaticity
measurements. Select the test pattern that matches the color you are measuring.
11. Tap Save.

Modifying a TCGD file

1. Tap Menu > Advanced Setup > TCGD File Setup.
2. Select a TCGD file in the Current Target (TCGD) File list.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Managing Projector Setting Files
60