Creating A Screen File; Modifying A Screen File; Creating A Mcgd File - Christie CP2208 User Manual

Creating a screen file

Use screen files to define the size of the display panel and image cropping. You can assign the same
screen file to multiple input devices.
1. Tap Menu > Advanced Setup > Screen File Setup.
2. Tap Save As.
3. Enter a name for the source file in the Filename field.
4. Tap OK.
5. Complete these fields:
Field
Letter Box
Lens Factor
Presentation
Cropping
6. Tap Save.

Modifying a screen file

1. Tap Menu > Advanced Setup > Screen File Setup.
2. Select a screen file in the Current Screen File list.
3. Modify the screen file settings.
4. Tap Save.

Creating a MCGD file

Create Measured Color Gamut Data (MCGD) files to correct on-screen colors. A colorimeter is
required to complete this procedure.
1. Turn the lamp on and allow it to operate for 20 minutes.
2. Tap Menu > Advanced Setup > MCGD File Setup.
3. Tap Save As.
4. Enter a name for the MCGD file in the Filename field and then tap OK.
5. Tap the option button in the red area of the chromaticity image to display the red test pattern.
6. Measure the red chromaticity with the colorimeter.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Description
All image data is displayed and the aspect ratio is maintained.
The amount to stretch an image horizontally. Allowable values
can range from 0.00 to 7.99. Enter 1 if you are not using an
anamorphic lens.
The size and location of the image. By default, the projector
uses a 2048 x 1080 panel.
Hides unwanted image data.
Managing Projector Setting Files
59