Projector Components - Rear; Positioning The Projector - Christie CP2208 User Manual

Projector components - rear

Positioning the projector

Warning! Failure to comply with the following could result in serious injury.
Two people are required to safely lift and install the projector.
Caution! Failure to comply with the following could result in minor or moderate injury.
Complete a lamp adjust whenever you move or level the projector or replace the lamp.
1. If you are installing the projector in the optional rack stand (P/N: 108-416102-XX) follow the
instructions provided with the rack stand to install it.
2. Position the projector so it is centered and parallel with the theatre screen. If space is limited,
aim the projector slightly off-center and use lens offset to center the image on the screen.
CP2208 User Manual
020-101916-02 Rev. 1 (08-2015)
Service Access Door
A
Power Cord and AC Receptacle
B
Lamp Access Door
C
Installing and Setting Up
14