Crankshaft/Balancer Installation - Honda TRX500FM Service Manual

CRANKCASEITRANSMISSION/CRANKSHAFT/BALANCER
14-16
Sel the crankshaft in a stand or V-blocks (1] and
measure the runoul using a dial indicator (2).
SERVICE LIMIT: 0.15 mm (0.006 in)
[2[
[2[
Measure the side clearance between the connecting
,----===============
rod big end and crank weight with a feeler gauge.
SERVICE LIMIT: 0.8 mm (0.03 in)
Measure Ihe radial clearance at the connecting rod big , - - - - -- - - - - - - - - - - - -
end in an X and Y directions.
SERVICE LIMIT: 0.05 mm (0.002 in)
INSTALLAT[ON
Apply engine oil to a new rear crankshaft bearing.
Drive the crankshaft bearing into Ihe rear crankcase
with the marking side facing up.
TOOLS:
[1] Driver
[2] Attachment, 72 x 75 mm
[3] Pilot, 32 mm
07749-0010000
07746-0010600
07MAD·PR90200
Other bearing replacement in the crankcase halves
(page 14-18).
[1 [
[2[