Data Encryption Function; Notice To Users - Toshiba e-studio 2000ac Safety Information Manual

 Data Encryption Function
An icon appears on the touch panel when the user data of the Data Encryption Function by AES are
enabled on this equipment.
An icon appears on the touch panel when the Data Encryption Function with Wipe Technology HDD
is enabled on this equipment.
How to check the active status of Data Encryption Function
The icon or
enabled. Contact your service technician for the use of the Data Encryption Function.
 Notice to Users
After a suitable place has been selected for the installation of the e-STUDIO2000AC/2500AC, the
e-STUDIO2505AC/3005AC/3505AC/4505AC/5005AC or the e-STUDIO2008A/2508A/3008A/3508A/
4508A/5008A, please do not change it. Avoid excessive heat, dust, vibration and direct sunlight. Also,
provide proper ventilation as the copier emits a small amount of ozone.
6 Safety Information
appears on the upper right of the counter screen if the Data Encryption Function is
Indicates that the products affixing this mark use laser and potential risk and
hazard of eye or optic damage and/or skin burns if not avoided. Please follow the
cautions described near this mark.
Indicates that the locations affixing this mark are high temperature and have
potential risk and hazard of skin burns and/or relating damage if not avoided.
Please do not touch the location and its peripheral area.