[I]
Check actuation of data encryption function setting
Check if the data encryption function is in operation.
•
Press the [COUNTER] button on the control panel. If a key-shaped icon is displayed at the top right
of the screen, the data encryption function is in operation.
4.2.4
Procedure for disabling data encryption function
The basic setting procedure is the same as the one for enabling this function.
Set the value of 08-9379 to "0" (Invalid) in the following procedure.
P.4-13 "[D] Enable data encryption function"
4.2.5
Procedure for discarding HDD when data encryption function is
enabled
Set the data encryption function disabled following the procedure below.
P.4-15 "4.2.4 Procedure for disabling data encryption function"
Then perform 08-1426 (Forcible HDD data clearing) to completely delete the HDD data.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 15
e-STUDIO205L/255/305/355/455
BACKUP FUNCTION
4