Usb Memory - Barco HDQ 2K40 User Manual

15. Service

15.6 USB memory

Purpose
2 functions are available
• Custom settings can be saved on a USB stick.
• A selection of saved settings can be (down)loaded via an USB stick on the projector.
How to save custom settings
1. Press Menu to activate the menus and select Service → USB Memory.
Image 15-51
Main menu, service
Image 15-53
USB memory selection
2. Select Save Custom Settings and press ENTER to download this set.
Note: Make sure a formatted USB stick is inserted in the USB connector.
When no USB stick is available, a message will be shown: No USB device is found.
The name of the custom settings files contains the serial number of the projector from which ti is downloaded.
Load custom settings
1. Press Menu to activate the menus and select Service → USB Memory.
292
Image 15-52
Service, USB memory
R5905303 HDQ 2K40 02/03/2015