High End Systems Mirror - Barco HDQ 2K40 User Manual
Hide thumbs
Also See for HDQ 2K40:
- Safety manual (71 pages) ,
- Quick manual (4 pages) ,
- Service bulletin (10 pages)
Table of Contents
Advertisement
13. Alignment
2. Press ENTER.
3. Use the ▲ or ▼ key to select 3D Sync Loop Through.
Image 13-168
3D sync loop through
4. Press ENTER to toggle between [On] and [Off].
[On] : 3D SYNC OUT is directly routed from 3D SYNC IN
[Off] : the internal 3D sync signal is available on 3D SYNC OUT, native or inverted as indicated in the 'Invert 3D Sync Out' setting.
13.16 High End Systems Mirror
About the mirror
The digital mirror is DMX controlled. This control can be done via the projector or via Projector Toolset. External DMX control is still
possible. Almost any image can be displayed on almost any place in the room using the pan and tilt adjustments. Settings storing
per layout is possible.
Projector control activation
1. Press Menu to activate the menus and select Alignment → High End Systems Mirror.
Image 13-169
Main menu, alignment
226
Image 13-170
Alignment, High End Systems Mirror
R5905303 HDQ 2K40 02/03/2015
Advertisement
Table of Contents
