Barco HDQ 2K40 User Manual page 258

14. Projector Control
Image 14-77
Front XLR Output voltage enable
2. Press ENTER to toggle between [On] and [Off].
[On] : Front XLR Output voltage enabled.
[Off] : Front XLR Output voltage disabled.
Output voltage level setup
1. Press Menu to activate the menus and select Projector Control → DMX → Output voltage level.
Image 14-78
Main menu, projector control
Image 14-80
Front XLR output voltage level
2. Press ENTER to toggle between [0 Volt], [9 Volt], [12 Volt] and [24 Volt].
254
Image 14-79
Projector control, DMX
R5905303 HDQ 2K40 02/03/2015