Barco HDQ 2K40 User Manual page 58

5. Lenses & Lens Holder
4. Ensure that the lens holder stands in the On-Axis position (horizontal and vertical mid position).
Note: The lens holder is placed default in the On-Axis position at factory.
5. Gently insert the lens in such a way that the lens connector matches the socket.
Image 5-10
Mount lens
6. Insert the lens until the connector seats into the socket.
- the pin (3) on the lens holder matches with the sleeve in the lens.
- the connector seats into the socket (2)
Warning: Do not release the Lens yet, as the Lens may fall out of the Lens Holder.
7. Secure the lens in the lens holder by sliding the lens lock handle into the "locked" position, which is away from the lens power
supply socket. Ensure the lens touches the front plate of the lens holder.
Image 5-11
Fix lens
8. Continue with the installation of the lens fixation mechanism, see "Installing the lens fixation mechanism", page 56.
C
AUTION
before transporting the projector. Neglecting this can damage the Lens Holder and Prism.
54
:
Never transport the projector with a Lens mounted in the Lens Holder. Always remove the Lens
R5905303 HDQ 2K40 02/03/2015