Wireless Fixed Ip Address Set Up - Barco HDQ 2K40 User Manual

Image 14-41
Network, wireless
2. Press ENTER to open the Wireless menu.
3. Use the ▲ or ▼ key to select DHCP and press ENTER to toggle between [On] or [Off].
[On] : Wireless DHCP is activated. An automatic IP address is assigned.
[Off] : Wireless DHCP is deactivated. A fixed address must be used.
14.5.9 Wireless fixed IP address set up
Can only be used with a wireless network module installed.
How to set up
1. Press Menu to activate the menus and select Projector Control → Network → Wireless Setup.
Image 14-43
Main menu, projector control
R5905303 HDQ 2K40 02/03/2015
Image 14-42
Wireless, DHCP
Image 14-44
Projector control, network
14. Projector Control
243