Linearity Adjustment, Workflow - Barco HDQ 2K40 User Manual

13. Alignment
Or,
press ENTER when an item is selected and use the 4 arrow keys to adjust.
Image 13-43
Warping, keystone
5. Move the corner points to the desired position.
Image 13-44
Keystone adjustment
13.8.9 Linearity adjustment, workflow
Adjusting vertical and horizontal linearity
1. Select the 2 x 2 adjustment level. See "Setting the warping level", page 185.
The default selected anchor point is the left top corner of the image.
2. Select the desired warp area.
Depending on the selected area only the points in that area will be adjusted.
3. Select Linearity.
4. Select within Warp Adaptations, Horizontal or Vertical to adjust the corresponding keystone.
Or,
press ENTER when an item is selected and use the 4 arrow keys to adjust.
Image 13-45
Warping, Linearity
5. Adjust the horizontal and vertical linearity.
To fine tune this adjustment, select a specific area and add extra anchor points by changing the warp level.
188 R5905303 HDQ 2K40 02/03/2015