13. Alignment
Edit color targets
Color targets will be used when Custom or Custom2 is selected.
1. Select Edit Color Targets and press ENTER.
Image 13-116
Custom, color targets
Image 13-117
Color targets
2. Use the ▲ or ▼ key to select a color coordinate.
Use the ◄ or ► key to change the value of the selected coordinate.
Adjust all other coordinates in the same way.
Select Reset to return to previous saved values.
13.14 Scenergix
13.14.1 Introduction
Why ScenergiX ?
When working in a multichannel setup the HDQ 2K40 and its Soft Edge possibilities enable an image blending that gives the ap-
pearance of a single view, thus achieving realistic immersion for the majority of wide screen applications.
ScenergiX is limited to half the resolution of the projector.
208
R5905303 HDQ 2K40 02/03/2015