Orientation - Barco HDQ 2K40 User Manual

13. Alignment

13.2 Orientation

What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation are possible:
• front/table
• front/ceiling
• rear/table
• rear/ceiling
• auto front : automatic front, projector detects itself if it is ceiling or table mounted and projects always a readable image.
• auto rear : automatic rear, projector detects itself if it is ceiling or table mounted and projects always a readable image.
How to set the correct orientation
1. Press Menu to activate the menus and select Alignment → Orientation.
Image 13-1
Main menu, alignment
2. Use the ▲ or ▼ key to select the desired orientation and press ENTER to activate.
174
ScenergiX
3D Glasses
High End Systems Mirror
Image 13-2
Alignment, orientation
Projector
EBU
SMPTE
Custom
Status
White level
Black level
ScenergiX pattern
Adjust lines
Reset
Dark Time Adjustment
Actual Dark Time
L/R Output Reference Delay
3D Sync Loop Through
Projector Controlled
Pan / Tilt
Store setting per layout
R5905303 HDQ 2K40 02/03/2015