Advanced Timings, Clamp Delay - Clamp Width - Barco HDQ 2K40 User Manual

• Total lines: Total lines in the source.
How to set up
1. Press Menu to activate the menus and select Image → Timings.
Image 10-52
Main menu, Image
Image 10-54
Timings window
2. Press ENTER to select.
3. Use the ▲ or ▼ key to select a setting.
4. Use the ◄ or ► key to change the value
Or,
press ENTER to open the specific adjustment menu. Follow the adjustment method as described in "Navigation and adjust-
ments", page 82.
5. Continue with the other settings in the same way until all timings are set.
For a new measurement, press the Auto Image button on the RCU or local keypad.

10.5.2 Advanced timings, clamp delay - clamp width

About the advanced settings
Clamp delay
Clamp width
R5905303 HDQ 2K40 02/03/2015
The time between the trailing edge of the sync pulse and the leading edge of the clamp pulse, in pixels.
Can be any value between 0 and 255.
The width of the clamp pulse can be any value between 0 and 255.
Image 10-53
Image, timings
10. Image
131