Usb Memory - Barco HDF W series Installation Manual

Image 14-54
Factory defaults, settings

14.7 USB memory

Purpose
2 functions are available
• Custom settings can be saved on a USB stick.
• A selection of saved settings can be (down)loaded via an USB stick on the projector.
How to save custom settings
1. Press Menu to activate the menus and select Service → USB Memory. (image 14-55, image 14-56, image 14-57)
2. Select Save Custom Settings and press ENTER to download this set.
Note: Make sure a formatted USB stick is inserted in the USB connector.
When no USB stick is available, a message will be shown: No USB device is found.
The name of the custom settings files contains the serial number of the projector from which ti is downloaded.
Image 14-55
Main menu, service
Image 14-57
USB memory selection
R5905158 HDF W SERIES 10/07/2012
Image 14-56
Service, USB memory
14. Service
213