Save Custom Settings - Barco HDQ 2K40 User Manual

Image 10-92
Image file services, Options
2. Press ENTER to toggle between [Off], [Always] or [Load File].
- Off : auto picture alignment deactivated.
- Always : auto picture alignment is always activated.
- Load file: when new file is loaded for the selected source.

10.7 Save custom settings

What can be done ?
The current custom settings can be saved to internal backup device in the same way as it would be done when the projector lamp
was switched off.
When settings are changed when the lamp is off, a manual Save custom settings must be executed to save the changes.
When the message Save changes is displayed, newer switch off the projector.
How to save
1. Press Menu to activate the menus and select Image → Save Custom Settings
Image 10-94
Main menu, Image
2. Use the ▲ or ▼ key to select Yes and press ENTER.
Image 10-96
Save custom settings, question
R5905303 HDQ 2K40 02/03/2015
Image 10-93
File options, Auto Picture Alignment
Image 10-95
Image, save custom settings
10. Image
141