13. Alignment
The blanking adjustment menu opens.
Image 13-103
Blanking adjustment
3. Use the ▲ or ▼ key to select the desired blanking adjustment and adjust with the ◄ or ► key.
Select Reset to reset all blanking adjustments.
13.10 Contrast-Intensity
Purpose
Intensity : change the brightness of the complete output signal (main and PiP window together) of the projected image.
How to set up
1. Press Menu to activate the menus and select Alignment → Contrast/Intensity.
Image 13-104
Main menu, alignment
2. Use the ▲ or ▼ key to select Intensity.
Use the ◄ or ► key to change the intensity until the desired value is reached (adjustable between 0 and 255)
Image 13-106
Intensity
204
Image 13-105
Alignment, contrast/intensity
R5905303 HDQ 2K40 02/03/2015