Removal Of The - Barco HDQ 2K40 User Manual

2. Push the cover against the projector until the locks at the top snap.
3. Tighten the captive screw (2).
Image 17-8
Installing the front cover
4. Reinstall the rubber dust ring around the Lens Holder.
Image 17-9
Installing the rubber dust ring
17.7 Removal of the back cover
Necessary tools
Flat screwdriver
How to remove the back cover?
1. Release the 2 captive screws (1).
2. Pull back the cover until the locking mechanism at the top releases.
3. Remove the cover (2).
R5905303 HDQ 2K40 02/03/2015
1 1
2 2
17. Removal and installation of the projector covers
2 2
311