Barco HDQ 2K40 User Manual page 36

3. Physical installation
b) Unplug both power plugs from the short power link cable (2).
1
Image 3-16
3. Connect the power output cord from the UPS unit (1) to the UPS inlet socket of the projector (right socket) (2).
Tip: Position the cable behind the back cover instead of directly connecting the power plug. This will make it possible to
remove the back cover without unplugging the UPS inlet cable.
2
Image 3-17
4. Secure the UPS inlet socket with a fixation spring:
a) Squeeze the fixation spring together (1).
b) While squeezing, slide the fixation spring on the pins and push it against the power plug.
c) Release the fixation spring.
Tip: Install the second fixation spring on the power outlet socket to prevent losing it.
Image 3-18
32
1
1
1
1
1
2
R5905303 HDQ 2K40 02/03/2015