14. Projector Control
14.4 Serial Communication
Overview
•
Baud rate setup
•
Interface Standard
14.4.1 Baud rate setup
What can be done ?
The baud rate for to establish a serial communication with a computer can be set.
How to set
1. Press Menu to activate the menus and select Projector Control → Serial Communication → Baudrate.
Image 14-9
Main menu, projector control
Image 14-11
Serial communication, baud rate
2. Press ENTER to toggle between the available baud rates.
The following baud rates can be selected:
-
9600
-
19200
-
38400
-
57600
-
115200
14.4.2 Interface Standard
What can be done?
The communication protocol for the communication between the projector and a computer can be set to RS232 or RS422.
How to set up
1. Press Menu to activate the menus and select Projector Control → Serial Communication.
232
Image 14-10
Projector control, serial communication
R5905303 HDQ 2K40 02/03/2015