Ir Control Switching - Barco HDQ 2K40 User Manual

Image 14-55
Network, wireless
2. Press ENTER to open the Wireless menu.
3. Use the ▲ or ▼ key to select Subnet Mask and press ENTER to activate the input box.
Image 14-57
Wireless default gateway, input
4. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.

14.6 IR Control switching

What can be done ?
Each IR receiver inside the projector can be activated or deactivated. When an IR receiver is deactivated, no IR signal sent to this
IR receiver will be processed.
How to activate or deactivate
1. Press Menu to activate the menus and select Projector Control → IR control.
R5905303 HDQ 2K40 02/03/2015
Image 14-56
Wireless default gateway
14. Projector Control
247