Flex, Light Output Configuration; About Flex, Light Output Control - Barco HDQ 2K40 User Manual

Image 14-144
Main menu, projector control
Image 14-146
SMS subscription
2. Press ENTER to open the Edit mode. Clear the current number and press ENTER again.
3. Select OK and press ENTER to configure the software.
Subscribe or Unsubscribe via SMS
1. Create a new SMS message containing 2 parts:
- activation code (created in Projector Toolset)
- action string
separated by a space character.
Example :
to subscribe : "1234 SUBSCRIBE"
to unsubscribe : "1234 UNSUBSCRIBE"
2. Send this message to the GSM number associated with the projector.
The receiving projector analyses the message and add or remove the GSM number associated with the message.
A result message is sent back to the requested cell phone.
14.15 FLEX, light output configuration

14.15.1 About FLEX, Light output control

Overview
With the FLEX technology the projector owners can lock the light output to different levels. The locking can be done via 3 different
ways:
• Via Projector Toolset when connected via an Ethernet connection with the projector. See Projector Toolset's user guide
(R5905073, index 04), chapter "FLEX, light output control".
• Via the OSD menu of the projector itself
• Via an SMS message send to a projector equipped with an optional GSM board.
R5905303 HDQ 2K40 02/03/2015
Image 14-145
Projector control, GSM configuration
Image 14-147
Subscriber 1
14. Projector Control
273