Unpacking The Projector - Barco HDQ 2K40 User Manual

Projector weight
It is forbidden to lift up the projector with manpower, use a hoisting tool instead. Do not underestimate the weight of the projector.
The projector weights ±220 kg (±485 lb.).
Be sure that the structure on which the projector has to be installed is capable of handling five (5) times the complete load of the
system.
2.2

Unpacking the projector

Let the projector acclimatize after unpacking. Neglecting this may result in a startup failure of the Light Pro-
cessor Unit.
Introduction
Upon delivery, the projector is packed in a cardboard box placed on a pallet and secured with banding and fastening clips. To provide
protection during transportation, the projector is surrounded with foam. Once the projector has arrived at its destination, it needs to
be removed from the cardboard box and the pallet in a safe manner and without damaging the projector.
How to unpack the projector?
1. Loosen the banding by pulling the free end of the banding loop in the clip.
Remove the box cover.
Image 2-2
2. Unfold the top side of the outer cardboard box.
Take out the small box located between inner and outer cardboard box (this box contains the accessories such as manuals,
remote control, etc.).
Remove the outer cardboard box by sliding it up above the projector.
R5905303 HDQ 2K40 02/03/2015
2. General
17