Wireless Default Gateway Set Up - Barco HDQ 2K40 User Manual

14. Projector Control
Image 14-52
Wireless Subnet Mask, input
4. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.

14.5.11 Wireless default gateway set up

Can only be used with a wireless network module installed.
How to set up
1. Press Menu to activate the menus and select Projector Control → Network → Wireless Setup.
Image 14-53
Main menu, projector control
246
Image 14-54
Projector control, network
R5905303 HDQ 2K40 02/03/2015