1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. HDX 4K
  6. User manual

Barco HDX 4K User Manual

Hide thumbs Also See for HDX 4K:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
HDX 4K
User guide
R5906070/00
23/09/2016

Advertisement

Table of Contents
loading

Related Manuals for Barco HDX 4K

Summary of Contents for Barco HDX 4K

  • Page 1 HDX 4K User guide R5906070/00 23/09/2016...
  • Page 2 Product revision Software version: 0.10.0 - alfa Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium Phone: +32 56.36.82.11 Fax: +32 56.36.883.86 Support: www.barco.com/en/support Visit us at the web: www.barco.com Printed in Belgium...
  • Page 3 The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of complaint, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period.

  • Page 5: Table Of Contents

    11.1.2 Wired IP address set up ..................... . 70 R5906070 HDX 4K 23/09/2016...
  • Page 6 Index........................101 R5906070 HDX 4K 23/09/2016...

  • Page 7: Safety

    “warnings” and “cautions” are given depending on the installation procedure. Read and follow these “warnings” and “cautions” as well. Clarification of the term “HDX” used in this document When referring in this document to the term “HDX” means that the content is applicable for following Barco products: • HDX 4K •...

  • Page 8: Important Safety Instructions

    Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the device due to lightning and AC power-line surges. R5906070 HDX 4K 23/09/2016...
  • Page 9 fire extinguishers. Never use water on an electrical fire. Always have service performed on this projector by authorized Barco service personnel. Always insist on genuine Barco replacement parts. Never use non-Barco replacement parts as they may degrade the safety of this projector.
  • Page 10 If the product exhibits a distinct change in performance, indicating a need for service. • Replacement parts: When replacement parts are required, be sure the service technician has used original Barco replacement parts or authorized replacement parts which have the same characteristics as the Barco original part. Unauthorized substitu- tions may result in degraded performance and reliability, fire, electric shock or other hazards.

  • Page 11: High Brightness Precautions: Hazard Distance (Hd)

    Based on national requirements, no person is allowed to enter the projected beam within the zone between the projection lens and the related hazard distance (HD). This shall be physically impossible by creating sufficient separation height or by placing barriers. R5906070 HDX 4K 23/09/2016...

  • Page 12: Hd For Fully Enclosed Projection Systems

    1-3 two areas should be considered: the restricted enclosed projection area (RA) and the observation area (TH). RESTRICTED AREA DIFFUSE REFLECTION Image 1-3 RA Restricted Access location (enclosed projection area). PR Projector. Theater (observation area). R5906070 HDX 4K 23/09/2016...

  • Page 13: Hd In Function Of The Lens Throw Ratio (Tr)

    HD in function of the lens Throw Ratio (TR) TR (Throw Ratio) The ratio of the distance to the screen (throw) to the screen width. HDX series projector Hazard Distance 10,0 Image 1-4 HD (in meter) in function of the Throw Ratio (TR) R5906070 HDX 4K 23/09/2016...

  • Page 14: Important Warnings Concerning Hdx Flight Cases

    In the event of a wheel breaking, flight cases must be rigidly strapped tight to prevent a stack collapsing. • Use an appropriate forklift to raise flight cases and take the necessary precautions to avoid personnel injury. R5906070 HDX 4K 23/09/2016...

  • Page 15: Installation Preparations

    Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guar- antee. Observing the specification mentioned in this chapter is critical for projector performance. Neglecting this can result in loss of warranty.

  • Page 16: Unpacking The Projector

    1. Remove the banding around the carton box, by releasing the fastening clips as illustrated, and open the box. Image 2-1 Opening box 2. Remove the small box on top of the projector. This box contains the accessories such as manuals, remote control, etc. R5906070 HDX 4K 23/09/2016...

  • Page 17: Initial Inspection

    Save all packing material until the inspection is completed. If damage is found, file claim with carrier immediately. The Barco Sales and Service office should be notified as soon as possible.

  • Page 18: Hdx Flight Case

    This check should confirm that there are no broken knobs or connectors, that the cabinet and panel surfaces are free of dents and scratches, and that the operating panel is not scratched or cracked. The Barco Sales and Service office should be notified as soon as possible if this is not the case.
  • Page 19 Front projection, Ceiling mounted, in table position Rear projection The projector is installed, either in a table mount or ceiling mount configuration, at the other side of the screen opposite the audience. AUDIENCE BACKSTAGE FLOOR Image 2-6 Rear projection R5906070 HDX 4K 23/09/2016...
  • Page 20 Off-Axis projection is obtained by shifting the lens up, down, left or right. Several parameters can be calculated determining the position in any installation. Formula to calculate the distance CD for On-Axis projection: CD = SH/2 + B - A R5906070 HDX 4K 23/09/2016...
  • Page 21 Side to side tilt, however, must not exceed ±15°. This limit ensures that the lamp in the projector operates properly and safely. More tilting within area C is allowed but lamp flicker can happen. 360° 15° 15° 15° 15° Image 2-10 Tilting allowed without problems No tilting allowed in this area R5906070 HDX 4K 23/09/2016...

  • Page 22: Projector Air Inlets And Outlets

    Projector Toolset is only available in a download version, no CD can be ordered. Where to find the download file(s) The program and all necessary plug-ins, as well as the Reference manual can be downloaded for free from my.barco.com. Regis- tration is necessary.
  • Page 23 If you are not yet registered click on New to myBarco? and follow the instructions. With the created login and password, it is possible to enter the Partnerzone of Barco. When your login is correct, the Partnerzone is free accessible.
  • Page 24 2. Installation preparations R5906070 HDX 4K 23/09/2016...

  • Page 25: Physical Installation

    4. Connect the male side of the power cord to the local power net. Caution: Ensure that the power net meets the power requirements of the projector. ARNING Do not attempt operation if the AC supply and cord are not within the specified voltage and power range. R5906070 HDX 4K 23/09/2016...

  • Page 26: Alignment Of A Table Mounted Projector

    Angle adjustment Mounting the bottom carry handler Necessary tools Open wrench 17 mm Necessary parts 4x bolt M10 x 16 mm How to mount 1. Turn the projector upside down. 2. Turn out the 4 feet. R5906070 HDX 4K 23/09/2016...
  • Page 27 4. Place the carry handle on the projector as illustrated. Adjustment knob to the back of the projector. Make sure that the mounting holes matches the holes in the projector. 5. Insert a bolt in each corner and turn in these bolts. R5906070 HDX 4K 23/09/2016...

  • Page 28: Mounting The Top Carry Handler

    1. Place the carry handle on top of the projector so that the fixation holes match the holes in the projector. Image 3-7 top carry handle 2. Turn in the 4 fixation bolts (1). Insert a washer between the bolt and the carry handle. R5906070 HDX 4K 23/09/2016...

  • Page 29: Suspension Of The Projector With Rigging Clamps

    To release the nuts of the rigging points use a 24 mm open ended spanner. Ensure that the rigging points are symmetrically lined up, so that the projector will hang in balance. Warning: Be careful while working with heavy loads. Warning: Always secure the rigging points after adjustment. Image 3-10 Rigging points, distance R5906070 HDX 4K 23/09/2016...
  • Page 30 5. Place the projector (upside down) under the truss installation and lower the truss until the support bars of the truss are nearby the rigging clamps mounted on the projector. Image 3-12 Mount to truss 6. Lift up the projector and hook the four rigging clamps over the support bars of the truss. R5906070 HDX 4K 23/09/2016...

  • Page 31: Alignment Of A Ceiling Mounted Projector

    20 cm. If necessary, turn the cables a few times around the truss to obtain this maximum distance. Alignment of a ceiling mounted projector Necessary tools 17 mm open spanner Skew adjustment 1. Turn the adjustment knob on the carry handle until the projected hatch pattern is perfectly squared. R5906070 HDX 4K 23/09/2016...
  • Page 32 Always adjust by two to avoid deformation of the frame. 2. Loosen the security nut on both clamps. 3. Adjust the adjustment nuts of both clamps until the desired tilting is reached. 4. Turn the safety nut on the rigging clamp against the rigging point R5906070 HDX 4K 23/09/2016...

  • Page 33: Lenses & Lens Selection

    Limited amount of available lenses In comparison to the regular HDX, the HDX 4k projectors have an actuator built in them to help provide a clear 4k image. This extra device means that less space is available in the projector for lenses, thus causing a more restricted amount of lenses that can be used.

  • Page 34: Lens Selection

    How to select the right lens 1. Determine the required screen width (SW). 2. Determine the approximate position of the projector in the room. 3. Start up the Lens Calculator on the Barco website: https://www.barco.com/en/media_entertainment/LensCalculator to determine the possible lenses for your configuration.

  • Page 35: Lens Installation

    3. Take the lens assembly out of its packing material and remove the lens caps on both sides. 4. Place the lens holder in the “unlocked” position by moving the lens lock handle (A) towards the lens power supply socket (B) as illustrated. R5906070 HDX 4K 23/09/2016...
  • Page 36 Ensure the lens touches the front plate of the lens holder. Image 4-12 Lock lens 9. Check if the lens is really secured by trying to pull the lens out of the lens holder. R5906070 HDX 4K 23/09/2016...

  • Page 37: Lens Removal

    When using the safety cable ? The lens safety cable must be used in any circumstances to protect a mounted lens in the lens holder when the projector is mounted above persons. Necessary parts Safety cable: R9801079 (Barco order number) R5906070 HDX 4K 23/09/2016...
  • Page 38 Secure the cable by fixating the nut of the clamp. Image 4-16 Clamp position 3. Turn the cable with hook lock around the carry handle and hook the hook lock around the cable. R5906070 HDX 4K 23/09/2016...

  • Page 39: Scheimpflug Adjustment

    DMD plane, the plane of sharp focus will also be tilted according to geometrical and optical properties. The DMD plane, the principal lens plane and the sharp focus plane will intersect in a line below the projector for downward lens tilt. R5906070 HDX 4K 23/09/2016...
  • Page 40 4 is a locking point and NOT used during Scheimpflug adjustment. AUTION In the HDX 4K, the Scheimpflug mechanism is positioned close to the actuator, which helps pro- vide the 4k UHD images. To avoid damaging the actuator during Scheimpflug adjustment, it is important to have the projector be in 4k UHD mode during the adjustment.
  • Page 41 Place the zoom lens in WIDE position (largest projected image) and adjust the focus by turning equally on nut 1, 2 and 3. c) Repeat steps “a” and “b” until the projected image is as sharp as possible. Image 4-21 Center focusing 6. Sharpen bottom left corner of the screen by adjusting nut 1. R5906070 HDX 4K 23/09/2016...
  • Page 42 4. Lenses & Lens selection Image 4-22 Left bottom focusing 7. Sharpen bottom right corner of the screen by adjusting nut 2. Image 4-23 Right bottom focusing 8. Sharpen top right corner of the screen by adjusting nut 3 R5906070 HDX 4K 23/09/2016...
  • Page 43 5. Tighten nut 4 until the offset of the image movement created in step 3 is canceled. Tip: The amount of image movement in step 3 will determine how tight the nut in step 5 will need to be turned to return the image to its original position. R5906070 HDX 4K 23/09/2016...
  • Page 44 4. Lenses & Lens selection R5906070 HDX 4K 23/09/2016...

  • Page 45: Input & Communication

    Image 5-2 Quad 3G SDI channel A Input DisplayPort Input Quad 3G SDI channel B Input HDMI Input Quad 3G SDI channel C Input HDBaseT Input 1 Quad 3G SDI channel D Input HDBaseT Input 2 R5906070 HDX 4K 23/09/2016...
  • Page 46 DP C SYNC DP D SYNC SYNC Image 5-3 Quad DisplayPort channel A Input Quad DisplayPort channel C Input Quad DisplayPort channel B Input Quad DisplayPort channel D Input Input specifications All inputs are DisplayPort 1.2. R5906070 HDX 4K 23/09/2016...

  • Page 47: Communication Connections

    The left one a Sub-D connector, the right one an USBB connector acting as RS input when connected to an USB input of a PC. You can use the RS232/RS422 input to connect a local PC to your HDX. By this way you can configure and control your HDX from your local PC. Advantages of using RS232/RS422 serial communication: R5906070 HDX 4K 23/09/2016...
  • Page 48 files from the projector without network connection. An USB-stick is plugged into the USB port and files can be transferred from or to the projector using the local or remote control unit. Note that the USB-stick has to be Linux FAT16 compatible. R5906070 HDX 4K 23/09/2016...

  • Page 49: Led And Button Indication Chart

    Projector is in ECO standby GREEN Lamp is on in normal mode GREEN-ORANGE Lamp is on in CLO mode ERR (error LED) No error RED toggles on/off Error ORANGE toggles on/off Warning IR signal received GREEN IR signal acknowledged R5906070 HDX 4K 23/09/2016...
  • Page 50 5. Input & Communication R5906070 HDX 4K 23/09/2016...

  • Page 51: Getting Started

    Power off projector • Using the RCU • Projector Address Functionality overview Local Keypad overview Menu Selection. Menu Activation. OSD On/Off. Menu Back. Power On/Off. Touch Panel On/Off. Input Selection. Shutter Open/Close. Test Patterns. Lens Menu. Touch Panel. R5906070 HDX 4K 23/09/2016...

  • Page 52: Power On Projector

    Power Off. Input Selection. Stereo Jack. Address button. RCU On/Off. Power on projector How to power on. 1. Press the mains switch at the back of the projector to switch on this projector. Image 6-1 Main switch R5906070 HDX 4K 23/09/2016...
  • Page 53 1. Make sure the available sources are connected to the appropriate input ports. 2. Press the Input Selection button on the keypad or on the remote control until: the LED of the selected source lit up GREEN, and the image of the selected source is projected. Image 6-3 R5906070 HDX 4K 23/09/2016...

  • Page 54: Switching To Standby

    1. Switch off the projector with the mains switch. ’0’ must be pressed. Image 6-5 2. Unplug the power cord from the projector. Using the RCU Pointing to the reflective screen 1. Point the front of the RCU to the reflective screen surface. R5906070 HDX 4K 23/09/2016...

  • Page 55: Projector Address

    IR sensor. 45° 45° 45° 45° 45° 45° Image 6-7 RCU to one of the IR sensors Projector Address Projector address Address installed in the projector to be individually controlled. R5906070 HDX 4K 23/09/2016...

  • Page 56: Controlling The Projector

    2. Enter the address with the digit buttons within 5 seconds after pushing the address key. Note: That address can be any digit between 0 and 9. The LED on the remote control must lit up while pressing a digit key. Otherwise the address is not entered in the remote control. R5906070 HDX 4K 23/09/2016...

  • Page 57: Graphic User Interface (Gui)

    Use the arrow keys (Menu Navigation buttons) to navigate to the desired menu item (2). The background color changes to light blue. Press the Menu Selection button (center key of the arrow keys) to activate that item and to jump one level deeper (3). Press the Back button to go up one level (4). R5906070 HDX 4K 23/09/2016...

  • Page 58: Test Patterns

    Checkerboard Color bars Convergence Full screen black / white / blue / green / red / cyan / magenta / yellow Grid Vertical Ramp Horizontal Ramp 4. To turn the test pattern off, select OFF instead. R5906070 HDX 4K 23/09/2016...
  • Page 59 7. Graphic User Interface (GUI) Image 7-5 Test Pattern menu, OFF button R5906070 HDX 4K 23/09/2016...
  • Page 60 7. Graphic User Interface (GUI) R5906070 HDX 4K 23/09/2016...

  • Page 61: Gui - Source

    1. Press Menu to activate the menus and select Source. Image 8-1 Select Source 2. Press ENTER. The Select Source menu is displayed with the actual available sources filled out. 3. Select the desired input. Image 8-2 Input selection R5906070 HDX 4K 23/09/2016...
  • Page 62 8. GUI – Source R5906070 HDX 4K 23/09/2016...

  • Page 63: Gui - Image

    Image 9-2 Contrast slider 3. Use the ▲ or ▼ key to select Saturation or Brightness. How to set up Brightness Level 1. In the main menu, select Image → Brightness. Image 9-3 Image menu — Brightness R5906070 HDX 4K 23/09/2016...

  • Page 64: P7 Realcolor

    When blending images from multiple projectors, the measured color coordination values of each projector can be altered to a desired common level. This so that the projected colors are identical over all projectors used. How to set the P7 desired values 1. In the main menu, select Image → Advanced → P7 Realcolor. R5906070 HDX 4K 23/09/2016...

  • Page 65: Setting The Output Resolution

    How to choose the output resolution 1. In the main menu, select Image → Advanced → Output resolution. Image 9-9 Advanced menu — Output resolution 2. Select the desired output resolution. Possible Resolutions: 4K UHD, WQXGA R5906070 HDX 4K 23/09/2016...
  • Page 66 9. GUI – Image R5906070 HDX 4K 23/09/2016...

  • Page 67: Gui - Installation

    Lens menu, Focus & Zoom 3. Use the ▲ or ▼ key to zoom the lens in or out. Use the ◄ or ► key to focus the lens to far or near. Image 10-3 Zoom and focus adjustment R5906070 HDX 4K 23/09/2016...

  • Page 68: Orientation

    The way of physical installation of the projector can be defined to the projector. The following installation are possible: • front/table • front/ceiling • rear/table • rear/ceiling How to set the correct orientation 1. In the main menu, select Installation → Orientation. R5906070 HDX 4K 23/09/2016...

  • Page 69: Warping

    For example, you can overshoot the screen and use 4 corner adjustment to pull your projected image corners back into the screen. How to adjust the image? 1. In the main menu, select Installation → Warp. Image 10-9 Installation menu, Warp 2. In the Warp menu, select 4Corners. R5906070 HDX 4K 23/09/2016...

  • Page 70: Lamp Illumination

    Within a certain power mode, the light output of the lamp can be reduced by reducing the lamp power How to reduce the power 1. In the main menu, select Installation → Illumination. Image 10-12 Installation menu, Illumination 2. In the Illumination Menu, select Power. R5906070 HDX 4K 23/09/2016...
  • Page 71 10. GUI – Installation Image 10-13 Illumination menu, Power 3. Use the Slider to change the power value. Image 10-14 Lamp Power Adjustment R5906070 HDX 4K 23/09/2016...
  • Page 72 10. GUI – Installation R5906070 HDX 4K 23/09/2016...

  • Page 73: Gui - System Settings

    This must not be 0.0.0.0. If there is no router on the projector’s local subnet then just set this field to any IP-Address on the subnet. R5906070 HDX 4K 23/09/2016...

  • Page 74: Wired Ip Address Set Up

    How to select a different interface theme 1. In the main menu, select System Settings →Themes. Image 11-3 System Settings Menu — Themes. 2. In the themes menu, select the desired Theme. You can choose one of the following: Light, or Dark. R5906070 HDX 4K 23/09/2016...

  • Page 75: Lens Calibration

    All settings and values on the projector can be reset to its default values. This can be done for each setting separately, or all settings together (factory reset). How to reset one or more projector settings 1. In the main menu, select System Settings → Reset. Image 11-6 System Settings menu, Reset R5906070 HDX 4K 23/09/2016...
  • Page 76 2. Select the checkbox next to the settings that need to be reset. 3. Click RESET to reset all selected settings. How to reset all projector settings 1. In the main menu, select System Settings → Reset. 2. In the Reset menu, click RESET ALL. R5906070 HDX 4K 23/09/2016...

  • Page 77: Maintenance

    2. Clean the housing of the projector with a damp cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. 1. Pressurized air cans are not efficient if there is too much dust on the surface, the pressure is too low R5906070 HDX 4K 23/09/2016...
  • Page 78 12. Maintenance R5906070 HDX 4K 23/09/2016...

  • Page 79: Servicing

    Remove and clear metal front filter Extra service information Extra service information for qualified service technicians can be found on Barco’s Partnerzone (URL:http:\\www.barco.com). Reg- istration is necessary. If you are not yet registered, click on Partnerzone registration and follow the instructions. With the created login and password, it is possible to enter the partnerzone where you can find extra service information about the projector.

  • Page 80: Removal Of The

    4. Fixate the 3 fixation screws (4). Image 13-3 Fixate input module 13.2 Removal of the front cover ARNING Switch off the projector and unplug the power cord before starting the procedure. Necessary tools 7 mm flat screw driver R5906070 HDX 4K 23/09/2016...
  • Page 81 1. Remove the lens. See "Lens removal", page 33. 2. Remove the rubber dust ring from the lens holder. Image 13-4 Dust ring removal 3. Release the 4 captive screws (1). Image 13-5 Front cover removal 4. Take off the front cover. R5906070 HDX 4K 23/09/2016...

  • Page 82: Mounting The

    1. Place the front cover with the rubber dust facing the projector on its place. Image 13-6 Mount front cover 2. Secure the 4 captive screws (1). 3. Reinstall the rubber dust ring around the lens holder. R5906070 HDX 4K 23/09/2016...

  • Page 83: Removal Of The Lamp Cover

    13.4 Removal of the lamp cover ARNING Switch off the projector and unplug the power cord before starting the procedure. Necessary tools 7 mm flat screw driver How to remove 1. Release the 6 captive screws. R5906070 HDX 4K 23/09/2016...

  • Page 84: Mounting The Lamp Cover

    Switch off the projector and unplug the power cord before starting the procedure. Necessary tools 7 mm flat screw driver How to mount 1. Place the front cover on the is place and secure the 6 captive screws. R5906070 HDX 4K 23/09/2016...

  • Page 85: Removal Of The Lamp House

    Switch off the projector and unplug the power cord before starting the procedure. Necessary tools Flat screwdriver How to remove 1. Remove the lamp cover on the input side, see "Removal of the lamp cover", page 79. 2. Release the 3 spring lock screws. R5906070 HDX 4K 23/09/2016...

  • Page 86: Installation Of The Lamp House

    3. Take the lamp house by both handles and pull it out. Image 13-11 Lamp house, removal 13.7 Installation of the lamp house ARNING Switch off the projector and unplug the power cord before starting the procedure. Necessary tools Flat screwdriver R5906070 HDX 4K 23/09/2016...

  • Page 87: Replacement Of The High Density Dust Filter

    While starting up the projector, the electronics detect if a lamp is installed. If no lamp is installed, it is not possible to start up the projector. 13.8 Replacement of the high density dust filter AUTION The high density filter must be replaced on a regular basis, depending on the environment condi- tions of the projector. R5906070 HDX 4K 23/09/2016...

  • Page 88: Remove And Clear Metal Front Filter

    New filter when needed (available kit : R98010085, contains 5 HEPA filters and one cleanable filter) How to remove 1. Remove the front cover, see "Removal of the front cover", page 76. 2. Release the thumb screw (1) R5906070 HDX 4K 23/09/2016...
  • Page 89 If you cannot clean the filter anymore, insert a new one. How to install 1. Pull the bottom holder to the front and insert the filter. 2. Fasten the thumb screw (1). AUTION Never use the projector with removed filters ! R5906070 HDX 4K 23/09/2016...
  • Page 90 13. Servicing R5906070 HDX 4K 23/09/2016...

  • Page 91: Specifications

    From VGA up to 4K (4,096 x 2,160) max pixel clock 400 Mhz Software tools Projection Toolset + Android app + iOS app Control XLR wired + IR, RS232, Wifi, GSM (opt) Network connection 10/100 Base-T, RJ-45 conn, Wifi (optional) R5906070 HDX 4K 23/09/2016...

  • Page 92: Dimensions Of A Hdx

    Available in future release A.2 Dimensions of a HDX Overview Center of gravity Center of gravity Image A-1 Dimensions, mm Geometrical centre Centre without lens Centre with lens 186.5 170.0 185.0 237.5 241.0 248.0 362.5 370.0 330.0 R5906070 HDX 4K 23/09/2016...

  • Page 93: Technical Regulations

    A. Specifications A.3 Technical Regulations Certificates RoHS Image A-3 Image A-4 Image A-5 Image A-2 Rohs Rohs OK CE mark EAC mark R5906070 HDX 4K 23/09/2016...
  • Page 94 A. Specifications R5906070 HDX 4K 23/09/2016...

  • Page 95: Stacking Hdx Projectors

    2. Turn in the delivered bolt. 3. Repeat for the other 3 stacking points. B.2 Stacking HDX projectors AUTION Maximum stack three (3) projectors in a table mounted configuration. Maximum stack two (2) projectors in a ceiling mounted configuration. R5906070 HDX 4K 23/09/2016...
  • Page 96 Extra actions for ceiling mounted stack Two safety cables must be mounted between both projectors, one at each longitudinal side. 1. Mount the safety cable around the carrying handle of the bottom projector. Push the safety hook through the loop. R5906070 HDX 4K 23/09/2016...
  • Page 97 Always use both safety cables of the lowest projector to secure a stacked projector in a ceiling mount configuration. How to open an interlocking adapter 1. Open an interlocking adaptor as illustrated. Image B-5 Interlocking, open R5906070 HDX 4K 23/09/2016...

  • Page 98: Aligning Stacked Hdx Projectors

    4. If necessary, adjust the inclination of the stacked projector with respect to the reference projector by turning the height adjustment ring of the interlocking adaptor at the front of the stacked projector in or out. Adjust until the outline of the hatch pattern is most symmetric with the reference hatch pattern. R5906070 HDX 4K 23/09/2016...
  • Page 99 7. Zoom the hatch pattern in or out until the outline of the hatch pattern matches exactly the outline of the reference hatch pattern. Note: Note that the “Zoom” function is motorized, which means that you have to access the projector software, via the local keypad or remote control unit, to operate the “Zoom” function. R5906070 HDX 4K 23/09/2016...
  • Page 100 8. If necessary, repeat from step 2 until the hatch pattern of the stacked projector is perfectly aligned with the hatch pattern of the reference projector. In case of a triple stacked table mount projector configuration adjust and align first the bottommost projector (reference), than the projector in the middle and finally the uppermost projector. R5906070 HDX 4K 23/09/2016...

  • Page 101: Environmental Information

    For more information about recycling of this product, please contact your local city office or your municipal waste disposal service. For details, please visit the Barco website at: http://www.barco.com/en/AboutBarco/weee...

  • Page 102: Contact Information

    Barco contact information President Kennedypark 35, 8500 Kortrijk, Belgium Importers contact information To find your local importer, contact Barco directly or one of Barco’s regional offices via the contact information given on Barco’s web site, www.barco.com. Made in information The made in country is indicated on the product ID label on the product itself.

  • Page 103: Glossary

    920,000 bits per second. It is also used as the serial port standard for Macintosh computers. When the difference between the 2 lines is < - 0.2V that equals with a logical ’0’. When the difference is > +0.2V that equals to a logical ’1’.. R5906070 HDX 4K 23/09/2016...
  • Page 104 A number that is used to identify a subnetwork so that IP addresses can be shared on a local area network. TR (Throw Ratio) The ratio of the distance to the screen (throw) to the screen width. R5906070 HDX 4K 23/09/2016...

  • Page 105: Index

    Installation 14, 31 Lens Enclosed projection Projector configurations Environment conditions Installation preparations Environmental information Installation requirements 11–12 Disposal information Clean air RoHS compliance Environment conditions Turkey Power requirements Environmental Information Projector weight Ethernet Ethernet connection 69–70 R5906070 HDX 4K 23/09/2016...
  • Page 106 91, 94 Power off Power on Mount stacking points Power requirements Projectors 91, 94 Align Prevent Electrical shock Stacking points Projector 16–17 Mount Positioning Standby Shift range Switch to Projector address 51–52 Status Light Controlling Suspend R5906070 HDX 4K 23/09/2016...
  • Page 107 Unpacking Communication 69–70 Projector IP address, wired connection USB port Lens adjustment User definition Calibration Network Reset Vertical tilt range Table mounted projector Alignment Warnings Technical Regulations Cooling liquid circuit Test Patterns Warping Themes Tilt range R5906070 HDX 4K 23/09/2016...

This manual is also suitable for:

Hdx 4k14Hdx 4k20 flexHdx 4k12

Table of Contents