Advanced Settings; About Input Setup; Input Configuration - Barco HDQ 2K40 User Manual

Image 9-3
Select source
9.3

Advanced Settings

Overview
•

About Input Setup

• Input configuration
• DVI - RGB input
• SDI input
• 5 cable input
• HDMI - DisplayPort input (3D input module)
9.3.1 About Input Setup
Overview
Each input module must be configured before these module can be used. This configuration is necessary so that the projector knows
which type of signal is connected to its input.
The projector has 4 input slots. Slot 1 and 2 is filled up by default with a DVI and Dual SDI input. Slot 3 and 4 can be filled up with
optional input modules. Identical modules are allowed.
9.3.2 Input configuration
3D item in the Input menu is grayed out when no 3D module is inserted in slot 3 or 4.
How to change?
1. Press Menu to activate the menus and select Input → Advanced Settings.
2. Press ENTER.
The Advanced Settings window is displayed with the actual situation filled out.
3. Use the ▲ or ▼ key to select an input
Press ENTER to open the selection menu which will be different from input type to input type.
Image 9-4
Main window
R5905303 HDQ 2K40 02/03/2015
Image 9-5
Advanced input settings
9. Input
87