Barco HDQ 2K40 User Manual page 22

2. General
Image 2-3
3. Remove the inner cardboard box by sliding it up above the projector.
Loosen the banding by pulling the free end of the banding loop in the clip.
Remove the upper piece of cardboard from the projector.
Image 2-4
4. Lift up the projector (with the supporting wooden board) from the pallet. A hoisting tool is recommended.
Make sure the 4 screws on the underside of the wooden board are accessible.
Release the projector from the supporting wooden board by removing the 4 screws.
Warning: It is forbidden to lift up the projector with manpower, use a hoisting tool instead. Do not underestimate the weight of
the projector. The projector weights ±220 kg (±485 lb.).
18 R5905303 HDQ 2K40 02/03/2015