3. PHYSICAL INSTALLATION
Overview
•
Remote control unit (RCU)
•
Installation of the Lamp House
•
Access to the power connection
•
Y-Δ (wye-delta) configuration of the projector
•
Connecting the projector with the power net
•
Connecting a UPS to the projector electronics
•
Landscape and portrait mode
•
Stacking multiple projectors
•
Adjusting the multifunctional frame
•
Aligning the projected image on the screen
•
Aligning stacked projectors
3.1
Remote control unit (RCU)
Introduction
The remote control unit (A) of the HDQ projector is equipped with a rugged case (B) and an XLR adaptor (C). The remote control
unit can be used wired via mini-jack or via rugged XLR. Note that the backlight, of the remote control unit, illuminate continuously
when wire connected.
Image 3-1
A
Remote control unit (RCU).
B
Rugged case.
C
XLR adaptor.
Overview
•
RCU battery installation
•
RCU rugged case installation
•
RCU XLR adaptor installation
•
Using the XLR adaptor of the RCU
•
RCU usage possibilities
3.1.1
RCU battery installation
Where to find the batteries for the remote control ?
The batteries are not placed in the remote control unit to avoid control operation in its package, resulting in a shorter battery life
time. At delivery the batteries can be found in a separated bag attached to the remote control unit. Before using your remote control,
install the batteries first.
R5905303 HDQ 2K40 02/03/2015
A
B
C
3. Physical installation
23