Installing The Lens Fixation Mechanism; Removing The Lens Fixation Mechanism - Barco HDQ 2K40 User Manual

5. Lenses & Lens Holder
5.5 Installing the lens fixation mechanism
W
ARNING
"Installing the lens fixation mechanism", page 56
Necessary tools
10 mm wrench
How to install the lens fixation mechanism?
1. Place the 2 lens fixation brackets (1) into position, as illustrated below. The fixation brackets must prevent the lens from coming
loose from the Lens Holder.
2. Secure the fixation brackets by installing a nut (2) on each bracket. Use a 10 mm wrench.
1
2
Image 5-14
Installing the lens fixation mechanism
Depending on which lens is used, it may not always be possible to install the fixation brackets at the positions
showed on the illustration. In that case, the brackets may be installed on the underside of the lens, following
the same principle. Always install 2 fixation brackets.
5.6 Removing the lens fixation mechanism
Necessary tools
10 mm wrench
How to remove the lens fixation mechanism?
1. Remove the nuts (2) from the fixation brackets. Use a 10 mm wrench.
2. Remove the fixation brackets (1) from the Lens Holder.
56
:
Ensure safe fixation of the projector lens. The lens fixation mechanism must be installed. See
1
1
R5905303 HDQ 2K40 02/03/2015
1