Barco HDQ 2K40 User Manual page 42

3. Physical installation
A Inclinating
B Rotating
C Skewing
Necessary tools
• 2.5 mm Allen wrench
• 17 mm wrench
How to inclinate and rotate the projector in the frame?
1. Release the locking screw(s) (1) on the adjustment mechanism(s) on the back of the frame. Use a 2.5 mm Allen wrench.
2. Turn the left and right adjustment screw (2) anti clockwise to lower the back of the projector
Or,
clockwise to rise the back of the projector.
Note: A 17 mm wrench can be used to turn the adjustment screws.
3. Turn the left and right adjustment screw (2) in the opposite direction to rotate the projector.
4. Tighten the locking screw(s) (1). Use a 2.5 mm Allen wrench.
Image 3-25
Inclinating and rotating the projector
How to skew the projector in the frame?
1. Release the locking screw(s) (1) on the adjustment mechanism on the back of the frame. Use a 2.5 mm Allen wrench.
Tip: Only the most reachable locking screw(s) on the adjustment rod may have been secured previously.
2. Turn the adjustment rod (2) clockwise to skew the projector clockwise
Or,
anti clockwise to skew the projector anti clockwise.
3. Tighten the locking screw(s) (1). Use a 2.5 mm Allen wrench.
Tip: Only secure the most reachable locking screw(s).
38
1
2
2
1
R5905303 HDQ 2K40 02/03/2015