Installation Of The Left Cover - Barco HDQ 2K40 User Manual

How to remove the left cover?
1. Release the 2 captive screws (1).
2. Release the 2 locks by sliding them towards each other (2). Pull the bottom side away from the projector.
3. Lift the cover up a little (3) and slide it out on the front side of the frame (5) while turning the back of the cover away from the
projector (4).
Image 17-12
Removing the left cover

17.10 Installation of the left cover

Necessary tools
Flat screwdriver
How to install the left cover?
1. Slide the cover in on the front side of the frame (1) while turning the back of the cover towards the projector (2). Lower the cover
until it rests on the top side of the projector (3).
2. Slide the locks to each other (4) and push the cover against the projector. Release the locks.
3. Tighten the 2 captive screws (5).
Image 17-13
Installing the left cover
R5905303 HDQ 2K40 02/03/2015
1 1
5
2 2
5 5
1
4 4
17. Removal and installation of the projector covers
1 1
4
4
3
2 2
5 5
4
2
3
4 4
1 1
2 2
5 5
4 4
313