Auto Dimming When No Signal; Auto Dimming When Over-Temperature - Barco HDQ 2K40 User Manual
Hide thumbs
Also See for HDQ 2K40:
- Safety manual (71 pages) ,
- Quick manual (4 pages) ,
- Service bulletin (10 pages)
Table of Contents
Advertisement
12. Lamp
[On] : when switched to pause, lamp power will be reduced.
[Off] : when switched to pause, power remains on its original value.
12.5 Auto dimming when No Signal
About auto dimming
When no signal is detected on the selected input the lamp power will be reduced from the current value to its minimum value. When
the input signal is re-detected, the lamp power is restored to its original value.
This function is a duplicate of the Auto dimming in the Input menu.
How to set up
1. Press Menu to activate the menus and select Lamp → Power → Auto Dimming No Signal.
Image 12-10
Main menu, lamp
Image 12-12
Auto dimming no signal
2. Press ENTER to toggle between [On] or [Off].
[On] : when no signal, auto dimming is started.
[Off] : when no signal, no auto dimming is started.
12.6 Auto dimming when Over-temperature
What can happen?
When an over-temperature is detected, the projector starts dimming the lamp so that the projector can cool down.
How to set up
1. Press Menu to activate the menus and select Lamp → Power → Auto Dimming Overtemperature.
166
Image 12-11
Lamp, power
R5905303 HDQ 2K40 02/03/2015
Advertisement
Table of Contents
