Shutdown Settings; Shutdown Retarding Time - Barco HDQ 2K40 User Manual
Hide thumbs
Also See for HDQ 2K40:
- Safety manual (71 pages) ,
- Quick manual (4 pages) ,
- Service bulletin (10 pages)
Table of Contents
Advertisement
9. Input
Image 9-29
No signal, logo
A dedicated logo can be loaded via Projector Toolset with a HDQ plug-in installed.
9.7.3
Shutdown settings
How to change the settings
1. Press Menu to activate the menus and select Input → No Signal. → Shutdown.
Image 9-30
Main window
Image 9-32
No signal, shutdown
2. Press ENTER to toggle between [On] and [Off].
[On] : projector goes in shutdown after a certain retarding time.
[Off] : projector does not go in shutdown.
9.7.4
Shutdown retarding time
About the shutdown retarding time
The retarding time is the time between no signal is detected and the moment that the projector shuts down.
How to set the retarding time
1. Press Menu to activate the menus and select Input → No Signal. → Shutdown time (min).
96
Image 9-31
Input, no signal
R5905303 HDQ 2K40 02/03/2015
Advertisement
Table of Contents
