Switch On The Projector - Barco HDQ 2K40 User Manual

Ind. Key name
16 TEXT
17 ENTER
18 Cursor keys
19 EXIT
20 WINDOW
21 PIP
22 Info
23 RC Operating indication
Table 6-1
6.3

Switch on the projector

How to switch on the projector?
1. Press the power switch at the back of the projector to switch on the projector.
Image 6-2
When '0' is pressed, the projector is switched off.
-
- When '1' is pressed, the projector is switched on.
The projector starts up in standby. The menus are accessible via the local LCD panel.
The start up screen is displayed on the local LCD panel and when fully started up, it changes to the overview screen.
R5905303 HDQ 2K40 02/03/2015
Description
Toggle key to activate or deactivate on screen text boxes while adjusting a setting.
When adjusting one of the image controls, e.g. during a meeting, the normally displayed
bar scale can be deactivated by pressing 'TEXT' key first. To re-display the bar scale
on the screen, press 'TEXT' key again. When TEXT is 'off', no adjustment menu's
will be displayed on the screen when entering the adjustment mode. All menus and
adjustments remain active on the local LCD panel.
Key to confirm an adjustment or selection in the adjustment mode.
To make menu selections when in the adjustment mode
Key to go one menu stage higher than the actual position when in the adjustment mode.
Selection of the active window "Main" or "PiP"
Direct access key for picture in picture selection.
Displays help information when on a certain menu item of the sofrware
Lights up when a button on the remote control is pressed. (This is a visual indicator to
check the operation of the remote control)
6. Getting started
67