Warp Board And Values Reset - Barco HDQ 2K40 User Manual

13. Alignment
Image 13-91
Main menu, alignment
Image 13-93
Warp board reset
2. Press ENTER to start the board reset.

13.8.23 Warp board and values reset

What can be done?
With some extreme warp values the hardware of the warping can get stuck. With only a hard reset of the board, it starts up with
the same extreme values and get stuck immediately. So that is not the solution. Therefore, while executing a hard reset, the warp
values are reset at the same time so that the board can start up.
How to reset board and values
1. Press Menu to activate the menus and select Alignment → Warping → .Warp board and values reset.
200
Image 13-92
Alignment, Warping
R5905303 HDQ 2K40 02/03/2015