Setting The Warping Level; Warp Adaptation Steps - Barco HDQ 2K40 User Manual

13.8.5 Setting the warping level

How to select
1. With the Warping menu displayed, use the ▲ or ▼ key to select more or less pixels to adjust.
Switching between the more or less pixels icon can be done with the ◄ or ► key.
1
Image 13-37
Warp level selection
1 Increment pixels
2 Decrement pixles
The current selected icon shows blue.
2. Press ENTER to increment or decrement the number of pixels.
The value inside the icon changes accordingly.
The following selections are possible:
- 2 x 2 (highest level);
- 3 x 3;
- 5 x 5;
- 9 x 9;
- 17 x 17;
- 33 x 33 (lowest level).

13.8.6 Warp adaptation steps

About the steps
An anchor point can be moved with a fixed number of steps: 1, 10 or 100. It is also possible to move an anchor point with custom
number of steps or a part of a step.
How to select a predefined number of steps
1. Use the ▲ or ▼ key to go to the Warp adaptation steps area.
The current selection is indicated in yellow.
2. Use the ◄ or ► key to select the desired steps.
R5905303 HDQ 2K40 02/03/2015
2
13. Alignment
185