Download
Share
Print this page
Barco DP4K-32B Service Bulletin
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. DP4K--32B
  6. Service bulletin
Barco DP4K-32B Service Bulletin

Barco DP4K-32B Service Bulletin

Hide thumbs Also See for DP4K-32B:

Advertisement

Quick Links

Download this manual
Barco service bulletin
1. POSSIBLE CONTRIBUTION TO INCREASED
LAMP BLACKENING AND TO REDUCED
LIFETIME OF THE LAMP
1.1 General
Phenomenon
Increased change of lamp blackening and possible reduced lifetime of the lamp. This issue
may occur on units delivered from February 2012 onwards.
Cause
Wrong orientation of the magnet inside the XL Lamp House.
Solution
Perform the procedure described in this document.
•
For a manual Lamp House, perform this procedure: "Validating the correct orientation
of the magnet in the manual XL Lamp House", page 3
•
For a motorized Lamp House, perform this procedure: "Validating the correct orientation
of the magnet in the motorized XL Lamp House", page 7
Scope
•
HDQ 2K40 projector (R9004570)
Page 1 of10
www.barco.com
Serial Number: 1160
Date:
Product:
Priority code*: B
A.
"Must" modification, Barco will provide the necessary components to perform this modification
at no charge.
B.
Improves the reliability of the product.
C.
Improves the general working conditions of the product.
D.
For information only.
27/05/2014
DP2K/DP4K-32B, HDQ 2K40 and
Galaxy 4K-32
Noordlaan 5, B-8520 Kuurne
Barco nv

Advertisement

loading
Need help?

Need help?

Do you have a question about the DP4K-32B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Barco DP4K-32B

Summary of Contents for Barco DP4K-32B

  • Page 1 Product: DP2K/DP4K-32B, HDQ 2K40 and Galaxy 4K-32 Priority code*: B ”Must” modification, Barco will provide the necessary components to perform this modification at no charge. Improves the reliability of the product. Improves the general working conditions of the product. For information only.
  • Page 2 Barco service bulletin • DP2K-32B projectors: - R9005900 - R9005904 (3D) - R90059045 (3D, Track 1) - R90059002 - R900590024 (Track 2) - R90059003 (with IMB) - R90059004 (Track 2) - R90059005 (Track 1) - R90059008 (Alchemy) - R90059009 (Alchemy LT) •...
  • Page 3 Barco service bulletin If you should have any more questions, or remarks, please do not hesitate to contact our technical support team via the following web site www.Barco.com/esupport. 1.3 Validating the correct orientation of the magnet in the manual XL Lamp House Contact the Barco helpdesk to receive the caliber magnet.
  • Page 4 Barco service bulletin Image 1-2 The magnet is located (1) on the bottom side of the Lamp House near the handle, but is not visible at this moment. 2. To validate the magnet orientation, approach the red side (2) of the caliber magnet to the left side of the Lamp House magnet.

  • Page 5: Left Side

    Barco service bulletin LEFT SIDE LEFT SIDE RIGHT SIDE RIGHT SIDE FORCE FORCE Image 1-3 Note:Only proceed with the next steps if the magnet is oriented incorrectly. 3. Remove the 4 screws (3) of the cover (with handle) and remove the cover. Use a 3 mm Allen wrench.
  • Page 6 Barco service bulletin Image 1-5 5. Check the orientation of the magnet. Approach the red side (5) of the caliber magnet to the left side (6) of the Lamp House magnet. Both magnets should attract to each other. Image 1-6 6.
  • Page 7 This procedure assumes that the Lamp House is already removed from the projector. Contact the Barco helpdesk to receive the caliber magnet. Image 1-7 The look of the Lamp House in the pictures can differ from the look of your own Lamp House.
  • Page 8 Barco service bulletin Image 1-8 2. Remove the 4 screws (2) of the cover (with handle). Use a 3 mm Allen wrench. Image 1-9 3. The handle with cover (3) can not be removed completely. Instead, move up the handle with cover (3) a few centimeters, until the magnet becomes reachable (4).
  • Page 9 Barco service bulletin Image 1-10 4. Take out the magnet (5) from the Lamp House. Image 1-11 5. Check the orientation of the magnet. Use the caliber magnet for that: approach the red side (6) of the caliber magnet to the left side (7) of the Lamp House magnet.

  • Page 10: Right Side

    Barco service bulletin FORCE FORCE LEFT SIDE LEFT SIDE RIGHT SIDE RIGHT SIDE Image 1-12 Both magnets should attract to each other. If this is not the case, switch the orientation of the magnet. 6. Place the magnet (8) back in the Lamp House.

This manual is also suitable for:

Dp2k-32bHdq 2k40Galaxy 4k-32