Barco HDQ 2K40 User Manual page 274

14. Projector Control
Image 14-129
Main menu, projector control
Image 14-131
GSM configuration
2. Select Pin code and press ENTER.
A PIN code input field appears.
Image 14-133
Device configuration, PIN code
3. Enter the 4 digit PIN code corresponding with the mounted SIM card. Use the digit keys on the remote control or the local keypad.
Each digit is replaced by an asterisks.
Press ENTER when the 4 digits are entered.
Image 14-134
4. Select OK and press ENTER to configure the software.
Replacing a SIM card with a new one
1. Before removing the current mounted SIM card, select Projector Control → GSM configuration → GSM pincode
270
Image 14-130
Projector control, GSM configuration
Image 14-132
GSM pincode
R5905303 HDQ 2K40 02/03/2015