Barco HDQ 2K40 User Manual page 26

2. General
5. Connect the projector with the power net. Choose the correct power input configuration according to your local power net and
connect the projector. See chapters "Access to the power connection", page 28, "Y-Δ (wye-delta) configuration of the projector",
page 28 and "Connecting the projector with the power net", page 30. If necessary connect the projector electronics with a UPS.
See chapter "Connecting a UPS to the projector electronics", page 31.
6. Physical installation of the projector. Position your HDQ 2K40 in landscape or portrait mode, see chapter "Landscape and
portrait mode", page 33. If necessary, choose to stack multiple projectors, either in a standing (table mount) or hanging (ceiling
mount) configuration, see chapter "Stacking multiple projectors", page 35.
7. Switch ON the projector. See chapter "Switch on the projector", page 67.
8. Align the projected image on the screen. See chapters "Adjusting the multifunctional frame", page 37 and "Aligning the pro-
jected image on the screen", page 39.
9. (if applicable) Align the projected images of the stacked projectors. See chapters "Adjusting the multifunctional frame", page
37 and "Aligning stacked projectors", page 40.
10.Connect your source to the appropriate input module. See "Input source connections", page 44.
11. Select the input slot to which the source is connected. See "Source selection", page 72.
22 R5905303 HDQ 2K40 02/03/2015