Removal Of The; Installation Of The - Barco HDQ 2K40 User Manual

17. Removal and installation of the projector covers
17.5 Removal of the front cover
Necessary tools
Flat screwdriver
Prior to removing the front cover, the lens needs to be removed. This procedure assumes that the lens is
already removed from the projector.
How to remove the front cover?
1. Remove the rubber dust ring from the Lens Holder.
Image 17-6
Removing the rubber dust ring
2. Release the captive screw (1).
3. Pull back the cover until the locking mechanism at the top releases.
4. Remove the cover (2).
Image 17-7
Removing the front cover
17.6 Installation of the front cover
Necessary tools
Flat screwdriver
How to install the front cover?
1. Position the front cover on its place and slide it towards the projector (1).
310
2 2
1 1
1 1
R5905303 HDQ 2K40 02/03/2015