13. Alignment
Adjustment lines can be activated when Scenergix pattern is [On].
How to display
1. Press Menu to activate the menus and select Alignment → Scenergix → Adjust lines.
Image 13-127
Main menu, alignment
Image 13-129
2. Press ENTER to toggle between [On] and [Off].
13.14.6 Data doubling
About data doubling
When a source (A) must be displayed via 2 projectors as one image (B), the vertical and horizontal start position and the size must
be determined so that each projector displays a part of the image. The overlap area can be adjusted with the Scenergix tools.
212
Image 13-128
Alignment, Scenergix
R5905303 HDQ 2K40 02/03/2015