Clo Targets - Barco HDQ 2K40 User Manual

Image 12-20
Power, CLO mode
2. Press ENTER to toggle between [On] or [Off].

12.8 CLO targets

What must be done?
The light output target can be set. This value will force the projector to produce the target lumens when the CLO mode is set to On.
How to set the target
1. Press Menu to activate the menus and select Lamp → Power → CLO mode.
Image 12-21
Main menu, lamp
Image 12-23
CLO Target lumens setup
2. Use the ◄ or ► key to change the CLO target lumens.
Depending on the projector model, the value range can be different. The screenshot is only given as information. For the exact
values, see the specifications of the specific projector.
R5905303 HDQ 2K40 02/03/2015
Image 12-22
Lamp, power
12. Lamp
169