Front Xlr Output Voltage Control - Barco HDQ 2K40 User Manual
Hide thumbs
Also See for HDQ 2K40:
- Safety manual (71 pages) ,
- Quick manual (4 pages) ,
- Service bulletin (10 pages)
Table of Contents
Advertisement
Image 14-74
DMX Art-Net activation
2. Press ENTER to toggle between [On] and [Off].
14.7.5 Front XLR output voltage control
What can be done ?
The output voltage on the front XLR connector can be enabled or disabled.
The output voltage level can be set to 0V, 9V, 12V or 24V.
DMX Art-Net can also enable the output voltage on the front XLR connector. To avoid that per accident a voltage is activated via
DMX Art-Net, set level to 0 V
How to enable or disable
1. Press Menu to activate the menus and select Projector Control → DMX → Output voltage enable.
Image 14-75
Main menu, projector control
R5905303 HDQ 2K40 02/03/2015
Image 14-76
Projector control, DMX
14. Projector Control
253
Advertisement
Table of Contents
