Warp Board And Values Reset - Barco HDF Use And Installation Manual

Image 12-91
Main menu, alignment
Image 12-93
Warp board reset
Press ENTER to start the board reset.

12.7.23 Warp board and values reset

What can be done?
With some extreme warp values the hardware of the warping can get stuck. With only a hard reset of the board, it starts up with
the same extreme values and get stuck immediately. So that is not the solution. Therefore, while executing a hard reset, the warp
values are reset at the same time so that the board can start up.
How to reset board and values
Press Menu to activate the menus and select Alignment → Warping → .Warp board and values reset.
R5905158 HDF SERIES 16/06/2015
Image 12-92
Alignment, Warping
12. Alignment
179