Reset Warp Settings - Barco FLM HD20 User Manual

12. Alignment menu
5. Use the ▲ or ▼ key to select a corner and direction and press ENTER.
6. Use ◄ or ► to move the selected point in the selected direction.
Image 12-42
Image 12-45

12.5.8 Reset warp settings

What can be done ?
The current warp settings can be reset or returned to zero (0). At that moment all functions within the warping menu are available
again.
How to correct the distortion
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select Warp and press ENTER.
The warp dialog box appears.
4. Use the ▲ or ▼ key to select Reset and press ENTER.
All warp settings are reset. The Status is set to [Off].
Image 12-47
124
Image 12-43
Image 12-46
Image 12-48
Image 12-44
Image 12-49
R59770180 FLM HD20 11/07/2008