Warp Board And Values Reset - Barco HDF W22 User And Installation Manual

12. Alignment

12.8.23 Warp board and values reset

What can be done?
With some extreme warp values the hardware of the warping can get stuck. With only a hard reset of the board, it starts up with
the same extreme values and get stuck immediately. So that is not the solution. Therefore, while executing a hard reset, the warp
values are reset at the same time so that the board can start up.
How to reset board and values
1. Press Menu to activate the menus and select Alignment → Warping → .Warp board and values reset.
Image 12-94
Main menu, alignment
Image 12-96
Warp board and values reset
2. Press ENTER to reset the board and the current warp values.
258
Image 12-95
Alignment, Warping
R5905158 HDF SERIES 08/12/2016