Ipv6 Router Ospf - Dell S4810 Reference Manual

Parameters
number
Defaults 1
Command INTERFACE
Modes
Command
Version 9.1.
History
(0.0)
Version
8.3.19.0
Version 7.8.1.0
Version 7.4.1.0
Usage
Setting a priority of 0 makes the router ineligible for election as a Designated
Information
Router or Backup Designated Router.
Use this command for interfaces connected to multi-access networks, not point-
to-point networks.

ipv6 router ospf

Enable OSPF for IPv6 router configuration.
S4810
Syntax
ipv6 router ospf process-id
To exit OSPF for IPv6, use the no ipv6 router ospf process-id command.
Parameters
process-id
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.1.
(0.0)
1256
Enter the number as the priority. The range is from 1 to 255.
Introduced on the S4810 and Z9000.
Introduced on the S4820T.
Added support for the C-Series.
Introduced on the E-Series.
Enter the process identification number. The range is from 1
to 65535.
Introduced on the S4810 and Z9000.
Open Shortest Path First (OSPFv2 and OSPFv3)