Table of Contents
Advertisement
Security Function Ver. 1.01 May 2016
1.
Overview
This Service Manual contains the essential operating procedures and precautions for using
the security functions.
2.
Compliance with the ISO15408 standard
This machine has an enhanced security function: Set the Enhanced Security Mode, in
Administrator Settings, to [ON].
This machine offers the security functions that comply with the ISO/IEC15408 (level: EAL2)
and U.S. Government Approved Protection Profile - U.S. Government Protection Profile for
Hardcopy Devices Version 1.0 (IEEE Std 2600.2
3.
Installation of the machine and steps to be performed
before operation
The service engineer should first perform the following steps before setting the machine for
the Enhanced Security Mode.
The ISO15408 evaluation for this machine assumes that the hard disk is installed in the
machine. Thus, make sure that the hard disk has been installed.
3.1
Unpacking and setting up the machine
• Be sure to correctly follow the procedures in order as explained in this Manual. If
you do not follow the procedure in order, the image trouble may occur.
• If any part requires replacement due to a machine trouble, perform the relevant
replacement procedure appropriately.
3.1.1
Removing the machine
1. Make sure that the machine package has not been previously unpacked.
2. Take the main body and the Paper Feed Cabinet (or the Desk) out from its packaging.
3. Remove the machine, holding it by the locations on the left side and the handles on the
right side and keeping it level.
Machine mass: approx. 72 kg/158-3/4 lb
• Make available collective manpower of an appropriate size for transporting the machine.
• When holding the transportation handles, be careful not to catch your fingers in the
machine.
3.1.2
Removing protective tape, packing and other shipping materials
1. Remove the protective tape and the protective materials.
TM
-2009).
1
1. Overview
Advertisement
Table of Contents
